Test Process that measures a liquid’s density as defined by the amount of mass present in a specified volume of liquid at a given temperature. Temperature affects density, as does the pressure to the extent that the liquid compresses. In, liquids deemed sufficiently incompressible, the volume does not depend on pressure.
** Includes non-uniformity and voids (if any)
Required Parameters
- Density {kg·m3, g·cm3, lb·ft3}
- Temperature
Optional Parameters
Measured Value & Uncertainty
- Density {kg·m3, g·cm3, lb·ft3}
Test Process that measures a gas’s density as defined by the amount of mass present in a specified volume of gas at a given temperature and pressure.
Gases are extremely responsive to temperature and pressure, causing their densities to change rather quickly. Measuring the density of gas the Ideal Gas Law (P*V = nRT) must be taken into account.
** Includes non-uniformity
Required Parameters
- Density {kg·m3, g·cm3, lb·ft3}
- Pressure
- Temperature
Optional Parameters
Measured Value & Uncertainty
- Density {kg·m3, g·cm3, lb·ft3}
The process of measuring insulation resistance of a cable or wire using high voltage.
Required Parameters
- Ohms– Expected Value
- Volts – V
Optional Parameters
- Amps
- UUT.Output – Output Name of the UUT Connecting Point
Measured Value & Uncertainty
The process of generating Energy across 2 phases using an AC Sinewave signal over a specific period of time at a given voltage and current supplied on different outputs. The Total Energy can then be measured by the device under test.
Required Parameters
- Volts – V
- Amps – A
- Time – {s, min, h}
- Frequency – Hz
Optional Parameters
- Watts – W
- Phase – deg
- PowerFactor – Ratio
- Time – {s, min, h}
- UUT.Input – Input Name of the UUT Connecting Point
Measured Value & Uncertainty
The process of generating Energy across 3 phases using an AC Sinewave signal over a specific period of time at a given voltage and current supplied on different outputs. The Total Energy can then be measured by the device under test.
Required Parameters
- Volts – V
- Amps – A
- Time – {s, min, h}
- Frequency – Hz
Optional Parameters
- Watts – W
- Phase – deg
- PowerFactor – Ratio
- Time – {s, min, h}
- UUT.Input – Input Name of the UUT Connecting Point
Measured Value & Uncertainty
The process of generating Energy using an AC Sinewave signal over a specific period of time at a given wattage. The Total Energy can then be measured by the device under test.
Required Parameters
- Watts– W
- Time – {s, min, h}
- Frequency – Hz
Optional Parameters
- Volts – V
- Amps – A
- Time – {s, min, h}
- UUT.Input – Input Name of the UUT Connecting Point
Measured Value & Uncertainty
The process of generating Energy using a DC signal over a specific period of time at a given voltage and current supplied on different outputs. The Total Energy can then be measured by the device under test.
Required Parameters
- Volts – V
- Amps – A
- Time – {s, min, h}
Optional Parameters
- Watts – W
- Time – {s, min, h}
- UUT.Input – Input Name of the UUT Connecting Point
Measured Value & Uncertainty
The process of generating Energy using an AC Sinewave signal over a specific period of time at a given voltage and current supplied on different outputs. The Total Energy can then be measured by the device under test.
Required Parameters
- Volts – V
- Amps – A
- Time – {s, min, h}
- Frequency – Hz
Optional Parameters
- Watts – W
- Time – {s, min, h}
- UUT.Input – Input Name of the UUT Connecting Point
Measured Value & Uncertainty
The process of generating Energy using a DC signal over a specific period of time at a given wattage. The Total Energy can then be measured by the device under test.
Required Parameters
- Watts– W
- Time – {s, min, h}
Optional Parameters
- Volts – V
- Amps – A
- Time – {s, min, h}
- UUT.Input – Input Name of the UUT Connecting Point
Measured Value & Uncertainty
The process measures the total Energy of an DC signal sourced by a device when the device sources Volts and Amps on different outputs.
Required Parameters
- Volts – V
- Amps – A
- Time – {s, min ,h}
Optional Parameters
- UUT.Output – Output Name of the UUT Connecting Point
Measured Value & Uncertainty
