Description – Length Radius commonly thought of as half the diameter of a full circle, the radius is the distance from the center point to the edge of an arc or partial circle.
Required Parameters
Optional Parameters
Measured Value & Uncertainty
Description – Length Circumference is the length measured around the inside or outside of a round or circular object.
Required Parameters
Optional Parameters
Measured Value & Uncertainty
Description – Length Diameter is the edge-to-edge straight-line distance passing through the center of a circular object. It can measure the inside open space or outside diameter of the object.
Required Parameters
Optional Parameters
Measured Value & Uncertainty
Description – Length is the straight-line distance between two points. It can be measured in one, two, or three dimensions with 6 degrees of freedom.
Length measurements are made from Point 1 to Point 2 based on the reference definition of an ISO or ASME standard datum specifically defining the orientation and references for each of the x,y,z points. The start and end points allow defining and distinguishing direction if required; otherwise, they are interchangeable.
Required Parameters
Optional Parameters
Measured Value & Uncertainty
The process of generating a stable frequency on an RF CW signal.
(more…)
The process measures the average difference between two segments of voltage generated by the UUT using a digitizing voltmeter. This is typically used in square wave measurement where you want to know the difference between the top of the square wave and the base of the square wave.
Using the trigger point the meter will measure the average voltage starting from the RefDelay to the end of the measurement width as the reference voltage. Then measure from the average voltage from the MeasDely to the end of the measurement width as the measured voltage. Then report back the delta voltage of measured voltage – the reference voltage.
Required Parameters
Optional Parameters
Measured Value & Uncertainty
The process measures the AC Peak-To-Peak Voltage sourced by the UUT with a digitizing voltmeter. It will report back the voltage difference of the highest measured value – the lowest measured value in voltage.
Required Parameters
Optional Parameters
Measured Value & Uncertainty
The process of measuring the time Period of an electrical signal.
Required Parameters
Optional Parameters
Measured Value & Uncertainty
The process of generating a rise-time or fall-time pulse of a pulse signal. The transition can be either be in a positive direction (Risetime) or a negative direction (Fall time).
Required Parameters
Optional Parameters
Measured Value & Uncertainty
Measuring the ratio of the mass of water vapor to the total mass of the dry air. The gravimetric method of calibration determines the specific humidity, with pressure and temperature having no effect on the masses.
Also referred to as moisture content
Required Parameters
Optional Parameters
Measured Value & Uncertainty