TestProcess.Measure.Current.AC.Squarewave
The process measures the Alternating Current sourced by a device with the assumption it is generating an AC Squarewave. (more…)
TestProcess.Measure.Voltage.AC
The process measures the AC RMS (Root-Mean-Square) voltage sourced by the UUT. (more…)
TestProcess.Measure.Current.AC
The process measures the AC Current sourced by a device without knowing the shape of the signal. (more…)
TestProcess.Measure.Current.AC.Sinewave
The process measures the Alternating Current sourced by a device with the assumption it is generating an AC Sinewave. (more…)
TestProcess.Measure.Resistance
The process of measuring the resistance of a resister or other device. (more…)
TestProcess.Source.Power.Noise.Terminated
This process connects a Termination to the input of a measurement device to reduce the noise and outside electrical signals.
TestProcess.Measure.Voltage.AC.Sinewave
The process measures the AC RMS (Root-Mean-Square) voltage sourced by the UUT. (more…)
TestProcess.Measure.Voltage.DC
The test process measures the DC (Direct Current) voltage sourced from the UUT. (more…)
TestProcess.Source.Time.Marker
The process of sourcing a time marker signal from a device.
This process is typically used to calibrate the sweep time accuracy on devices such as spectrum analyzers or oscilloscopes. (more…)
TestProcess.Source.Voltage.DC.Delta.Voltage
The process of sourcing 2 DC (Direct Current) voltage signals. First the VoltsRef signal is sourced and measured on the UUT, that value is stored as reference. Then the test Volts signal is sourced and measured on the UUT and stored as reading. The test result is returned as (reading – reference).
These two voltage signals are often used when calibrating the DC gain of a device such as an Oscilloscope. (more…)