Description – Parallelism is a fairly common symbol that requires the referenced surface or line to be parallel to a datum surface or line. Parallelism can reference a 2D line, but more commonly it describes the orientation of one surface plane parallel to another datum plane.
Required Parameters
- Distance – Nominal distance between parallel planes
Optional Parameters
- Type – {Axis or surface}
- Dimension – Largest dimension of the plane being measured
- StartPointX – Start Point on the X-Axis distance from the reference
- EndPointX – End Point on the X-Axis distance from the reference
- StartPointY – Start Point on the Y-Axis distance from the reference
- EndPointY – End Point on the Y-Axis distance from the reference
- StartPointZ – Start Point on the Z-Axis distance from the reference
- EndPointZ – End Point on the Z-Axis distance from the reference
- Resolution – Distance between points
- Reference – DIN, ISO, ASTM, ASME, or Federal G-Series Measurement Specifications [plain text]
Measured Value & Uncertainty
- Parallelism(m)