Metrology.NET®

TestProcess.Measure.Length.Form.Perpendicularity

DescriptionPerpendicularity is a fairly common symbol that requires the referenced surface or line to be perpendicular or 90° from a datum surface or line. Perpendicularity can reference a 2D line, but more commonly it describes the orientation of one surface plane perpendicular to another datum plane.

Required Parameters

  • Distance – Maximum dimension of surface or axis

Optional Parameters

  • Axis – the surface
  • StartPointX – Start Point on the X-Axis distance from the reference
  • EndPointX – End Point on the X-Axis distance from the reference
  • StartPointY – Start Point on the Y-Axis distance from the reference
  • EndPointY – End Point on the Y-Axis distance from the reference
  • Resolution – Distance between points
  • Reference – DIN, ISO, ASTM, ASME, or Federal G-Series Measurement Specifications  [plain text]

Measured Value & Uncertainty

  • Perpendicularity (m)

Leave a Reply